[C320-list] Forward Nav wood panel removal?

[Graeme Clark]

Rightly or wrongly I could only do it by removing the chart table. As an aside this makes for an easier working environment anyway when sorting out stuff in that area

Graeme

Sent from mobile: please excuse typos etc.!


> On 6 May 2018, at 04:20, Chris Burti <clburti at gmail.com> wrote:
> 
> As I recall the screws are forward just under the shelf and not very easy
> to see.
> 
> Chris Burti
> Farmville, NC
> 
> 
> On Sat, May 5, 2018 at 8:20 PM, Bill Culbertson <billculb_a2 at yahoo.com>
> wrote:
> 
>> Hi all,
>> I should know this.  In fact, I have done this successfully myself some
>> years back when I installed an upgraded icom VHF.  But I have managed to
>> forget so hope you can help me.
>> I can't remember how to remove the forward-most wooden panel of the
>> navstation area.  The aftmost nonwood panel directly above the navstation
>> table is a simple keyed & hinged arrangement which drops down to allow
>> access to the back side of all the electrical breakers.  The wood panel
>> immediately forward of that is a simple 4 corner screws setup - heads of
>> screws pointing starboard and points of screws port that you remove one at
>> a time and the entire wood panel comes out easily.
>> The panel which has me stymied is the wood panel immediately forward of
>> the panel described above.  I have removed it before but I can't remember
>> how.
>> I won't muddy this request by describing what I have done and not done but
>> I did everything I "thought" I remembered as being required but it wasn't
>> enough.  I still couldn't extract the panel.
>> Hopefully the collective wisdom/experience/recollection of this group will
>> come to the rescue.
>> -bill
>> Bill CulbertsonHarmony #859Lake Erie
>>