[C320-list] Cooling system

[islgirl3 at aol.com]

I understand that one side of the exhaust assemble is left hand thread and the other right?
Rich Nuzzolo Barbara RitaHull 897
 
 
 
-----Original Message-----
From: Doug Treff <doug at treff.us>
To: c320-list <c320-list at lists.catalina320.com>
Sent: Thu, Oct 11, 2018 4:47 pm
Subject: Re: [C320-list] Cooling system

Makes sense. Fix it now before your engine dies of a heart attack. Because that's what happens if you let it go. If the elbow clogs, then hot gases melt your exhaust hose. The water has to go somewhere and it could drain down the exhaust manifold and if it gets in the cylinders, you will have a very expensive repair job.

It happened to me and I had a cabin sole covered in exhaust water. The mechanic told me I was very lucky the engine wasn't damaged by waterlock. The cleanup was still expensive but way cheaper than a new engine.

How strong is the water flow out your exhaust? It should be pretty strong especially at higher RPMS. After I installed the new elbow, I noticed a dramatic increase in water flow which tells me it had been restricted for a while.


--
Doug Treff
doug at treff.us

On Thu, Oct 11, 2018, at 8:56 AM, William Russell wrote:
> I've been noticing what appears to be steam coming from the exhaust
> discharge lately.  Asked the Yanmar rep at the Annapolis boat show, who
> said I should replace the exhaust elbow, and do the hose to the Aqualift
> muffler box at the same time.  Does that make sense to y'all?
> Where's the best place to buy those parts?  Reading previous posts, I'm
> assuming this is a job I can do myself.
> Bill Russell
> "LIttle Wing," 1998 C320 #545
> Ithaca, NY