[C320-list] running wires from pedestal to panel

[Mark Gillingham]

A bit of soap can lubricate the wires so they drag more smoothly by each
other.

On Thu, Aug 8, 2019 at 07:52 Ted Harrison <tharrison at innovations-plus.com>
wrote:

> I purchased a wire feeder from harbour freight. It can with a hook. I
> pushed this up the stainless steel tube. Hooked a string onto the hook and
> pulled down. Then taped the string onto the cable and pulled it up and out.
>
> Not a lot of room but just enough.
>
> Ted Harrison
>
> Hull 424
>
> > On Aug 8, 2019, at 7:46 AM, Louis Spitz <aronella at gmail.com> wrote:
> >
> > How do I run wiring from the pedestal to the panel above the nav
> station? I’m trying to hook up a GPS,
> > and have the GPS wiring already inside the aft cabin below the pedestal.
> The housing is removed.
> > Thanks.
> > Lou Spitz
> > #195, Merry Chase
>
-- 
Mark Gillingham | @markgillingham | 312-543-3052