[C320-list] Introduction & Salon table question

[Ted Harrison]

Just wear gloves when you reach in there. The fibreglass can be rough and you make cut  yourself without them. 

Ted Harrison
Hull 424

> On Aug 30, 2019, at 10:13 PM, Troy Dunn <troutwarrior at gmail.com> wrote:
> 
> Based on the white scrape marks, I'd say the PO lost the metal wedge that
> goes in between the screw plate and the inner post.  Get a flashlight and
> check the bildge beneath the table for a roughly 2” slightly rectangular
> piece of metal that is maybe 3/8” thick.   If when you unscrew the wheel
> that part doesn’t drop out you know it's missing.   Without that part the
> post will wobble.  I will be down to the boat tomorrow.  I'll try to get
> some pictures of what this all should look like.
> 
> Troy Dunn
> Hull #514