[C320-list] Length of rode?

[Greg Flanagan]

I went with a Rocna 15 Anchor with 125 feet chain and 175ft rode. This works perfectly for the Pacific NW as we rarely need to go past the chain.

Greg 
Sidney, BC 
Hoop Dancer #1076

> On May 9, 2019, at 12:20 PM, David Veeneman <davidv at veeneman.com> wrote:
> 
> Hi all—new member here, and new owner of a C320. The anchor rode on my boat is in bad shape, so I’m getting ready to replace it. I’m looking at 300’ of chain/rode, because I plan to occasionally act as Race Committee boat for my yacht club’s regattas, and our start/finish mark is at a 50’ depth.
> 
> So, here are my questions: First, will 300’ of 3-strand chain/rode (I’m looking at Lewmar pre-spliced) fit in a Mk I anchor locker, assuming only 30’ or so of chain? I’m planning to hold the anchor on a bow roller.
> 
> Second, any suggestions on a good place to buy? I know rode isn’t cheap, but I’d like to avoid overpaying.
> 
> Thanks much for your help.
> 
> David Veeneman
> Hull 131, SV Adelante
> 
> 
>