[C320-list] Good Seafurl furler

[Joe Grande]

Having looked at my Schaeffer furler I am confused about any line that passes through a bottom plate! Mine rotates with the drum. The furling line passes from the drum through a series of fair leads to the cockpit. Your 5/16" line should be fine. I suggest visiting your owner's rigging manual. If you don't have one, consult You Tube about your model. Fair winds!


Sent from my T-Mobile 5G Device
Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of Jeff Smith <svsailmates512 at gmail.com>
Sent: Saturday, April 23, 2022 2:52:46 PM
To: C320-List at catalina320.com <C320-List at catalina320.com>
Subject: Re: [C320-list] Good Seafurl furler

My furler has a bottom plate with a hole through which the furling line is
supposed to pass. It gets knotted so it can’t pull back through. I could
try a clove hitch to keep it on the drum. My most recent thought is also to
try decoring the line.

It is 5/16” amd should not need to be decored, but that may allow it to
pass through the hole and allow the drum to spin.

Thanks,
Jeff


On Sat, Apr 23, 2022 at 4:24 PM RONALD HODEL <ronandgail2 at me.com> wrote:

> I probably don’t have the same furler as you but can’t you just secure the
> end of the line in the furler and then spin the furler by hand to wrap the
> line?
>
> Ron Hodel
> Lokomaikai #1070
>
> Sent from my iPhone
>
> > On Apr 23, 2022, at 12:11 PM, RONALD HODEL <ronandgail2 at mac.com> wrote:
> >
> > I probably don’t have the same furler as you but can’t you just secure
> the end of the line in the furler and then spin the furler by hand to wrap
> the line?
> >
> > Ron Hodel
> > Lokomaikai #1070
>