[C320-list] Pedestal guard replacement

[Graeme Clark]

Steve

Correct -  the screws fit into holes in the bottom of the guard. Once fully removed it will slide up. Possibly any excess sealant etc will make it hard to get started of course. Obviously your old instrumentation and power wires will be running down through the guard.  The mounting feet can then be removed and are secured with screws into the deck

Graeme Clark


> On 21 May 2022, at 19:17, Cheryl Dahl <dahls2017 at gmail.com> wrote:
> 
> Hello everyone,
> I am replacing all my original electronics and navpod on my boat .
> I purchased a new angled pedestal guard and larger navpod from defender and
> have mounted the new instruments and chart plotter. I also purchased the
> new mounting feet for the pedestal guard from CD .
> I haven’t yet attempted to remove the old guard yet. It looks like it will
> come out by removing the two set screws and sliding it up . Does anyone in
> the group have experience with this ? I am a newer 320 owner and group
> member.
> I enjoy reading all the discussions and advice.
> Thanks
> Steve Dahl
> #412
> Sans Souci