[C320-list] Running rigging

[Bruce Heyman]

Hi Jerry,
I replaced ours after having the rigging shop at West Marine prepare the ends.   We had them whip one end and an eye splice (small) on the other end.  Then as Jack already said you should be able to sew the new one to the old one and send it up the mast and over the sheave and back down to deck.
Bruce 

Bruce Heyman
Somerset #671   San Pedro (LA) California

-----Original Message-----
From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Jerry's Iphone via C320-list
Sent: Sunday, February 11, 2024 7:51 AM
To: Catalina C320 List <c320-list at catalina320.com>
Cc: Jerry's Iphone <jellyroll02 at gmail.com>
Subject: [C320-list] Running rigging

I need to replace most if not all of my running rigging. I’ve not had any success with getting on the local riggers schedule. Is this a viable DIY project? If so, where could I get some good instructions and tips?

Thanks in advance for your advice. 

Not far from sailing season on the lower Chesapeake!!😃

Jerry Sheets
JellyRoll  #890