[C320-list] Edison Pedestal?

[Bruce Heyman]

I second the endorsement of Kroil.   I also like to try tightening the fastener as should the head get buggered up you still have the "removal part" intact.   Usually, once it breaks free you are good to go.   I've found the hand impact tools that you strike with a hammer effective.

Bruce Heyman
Somerset #671   San Pedro (LA) California

-----Original Message-----
From: C320-list <c320-list-bounces at lists.catalina320.com> On Behalf Of Steve Weinstein via C320-list
Sent: Monday, February 19, 2024 1:35 PM
To: C320-List at Catalina320.com
Cc: Steve Weinstein <srw_jags at yahoo.com>
Subject: Re: [C320-list] Edison Pedestal?

 Try using AeroKroil.  It's a spray penetrating oil that does a good job of loosening stuck screws and bolts.  PB Blaster is okay,  but Kroil is much more effective.  I've used it for decades on old cars doing restoration work.  Stuff like PB, Liquid Wrench, etc. don't do much.  I've found Kroil to be the best. Alternatively, pick up some screw extractors.  You can find a set that will work with an electric drill.  After soaking the screws for a few days, hit the screws with the extractor bit and you might be pleasantly surprised. Hope that helps.
Steve Weinstein,2000 C320 #722, Vega

    On Monday, February 19, 2024 at 03:02:49 PM EST, islgirl3--- via C320-list <c320-list at lists.catalina320.com> wrote:  
 
 I have been trying to remove the black plastic cover under the compass without any luck. Age old story SS screws in aluminum housing. I have drilled small holes in the plastic cover to the base of the screws and soaked with PB Blaster no help. I have considered using heat but I know it will distort the plastic. Any ideas?

RichBarbara Rita 897

Sent from the all new AOL app for Android