[C320-list] Hot Water Pressure at a trickle

[Richard Walker]

Thanks it was great meeting you and great memories at the regatta here.

I find it very interesting that the new 316 is listed at $355,000. That should help maintain a a strong resale value of our 320s. You can practically change all the lines and we manufactured the engine for about 30,000 and half the new boat.

Best personal regards


Dick Walker
619.985.8105

> On Oct 14, 2024, at 19:16, bruceheyman via C320-list <c320-list at lists.catalina320.com> wrote:
> 
>  And Dick if my memory serves me right we bought the "extra" one from Wind Walker and it was our first rewarding upgrade to Somerset.  Still love it today.   The only thing that could make it better is some sort of knee valve.  It would allow you to get the temp you want with the Moen valve and then turn it on and off with your knee while washing dishes.Thanks!BruceSomerset - Los Angeles
>    On Monday, October 14, 2024 at 06:59:04 PM PDT, Richard Walker via C320-list <c320-list at lists.catalina320.com> wrote:  
> 
> I replaced my Moen two handle faucet that came with wind walker a year 2000 boat with a new pull out sprayer as identical to the one that came out on the boat about 2005 and beyond it saves a lot of water not to have the two valves
> 
> 
> Dick Walker
> 619.985.8105
> 
>> On Oct 14, 2024, at 18:09, Troy Dunn via C320-list <c320-list at lists.catalina320.com> wrote:
>> 
>> Sara
>> 
>> An anti scald device on a 320 is a new one on me.  There is definitely a
>> check valve on most 320s that sits on the cold water inlet to the heater.
>> I wonder if a previous owner somehow accidentally installed it backward on
>> the outlet side of the hot water heater after bypassing for winterizing.
>> The purpose of the check valve is to prevent hot water from backing up
>> into the cold water lines.  I’m not really convinced it’s necessary.
>> 
>> As far as saving water and getting the water temp "in the zone", replacing
>> the original ridiculous two handle faucet with a modern single handle
>> mixing valve faucet (preferably one that is also a pullout sprayer) is a
>> game changer.  I was so shocked that Hull#514 had the original faucet it
>> was the first thing I replaced.
>> 
>> -Troy
> 
>